Combo QuicRun WP16BL30 30A + 2435 4500kv

Hobbywing QuicRun WP-16BL30 Brushless Speed Controller/30A ESC+2435 4500kv Motor
WP16BL30 ESC:
http://www.hobbywing.com/products/enpdf/QuicRunWP10BL30-10BL60-8BL150.pdf
1.1 Water-proof and dust-proof for all-weather races.
(Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.)
1.2 Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.
1.3 9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit for different kinds of models, tires and tracks.
1.4 Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection.
1.5 One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.
1.6 Compatible with the optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.
Quicrun-Wp-16BL30:
Cont./ Peak Current/ Resistance: 30/ 180A/ 0.002Ω;
Motor Type Supported: Sensorless Brushless Motor;
Car Applicable: 1:18 & 1:16 On-road/ Off-road/ Buggy /Monster;
Battery: 4-9 Cell NiMH/ 2-3S Lipo;
BEC Output: 6V/1A (Linear Mode);
Size/ Weight: 36*28*16mm/ 38g;
External Program Port: Not Available;
Working Voltage Of Fan: No;
Motor Limit:
For 2S Lipo Or 6 Cells NiMH:
1. On-road: 2435 Size Or Smaller Motor With The KV<8000;
2. Off-road/ Buggy/ Monster: 2435 Size Or Smaller Motor With The KV<5000;
For 3S Lipo Or 9 Cells NiMH:
1. On-road: 2435 Size Or Smaller Motor With THe KV<5500;
2. Off-road/ Buggy/ Monster: 2435 Size Or Smaller Motor With The KV<3500;
2435 4500KV motor:
1.1 Featured by its large torque, QUICRUN-2435 motor suits for various 1/16 & 1/18 vehicles, especially buggies and monster trucks.
1.2 Composed by high quality components: exquisite aluminum alloy motor
shell, heat-resistant wires and magnets, and long-life bearings.
1.3 With high-quality gold-plated connectors have already been soldered on, all
these made QUICRUN-2435 motor a plug-and-play masterpiece.

2.1 Screw Spec
a) Two types of screws are suitable for the installation of QUICRUN-2435 motor: M2.6 (diameter=2.6) and M3 (diameter=3.0).(This motor has 3 pairs of screw holes on the front end bell, 2 pairs are 2.6mm in diameter, and 1 pair is 3.0mm in diameter)
b) Depth of screw holes: QUICRUN-2435<=4mm.
2.2 Motor Spec
Model: QUICRUN-2435
KV: 4500KV
LiPo Cells: 2-3
Resist: 0.0498ω
No-load Current: 1.5Amp
Max. Output Power: 150W
Current at the Point of M.O.P: 33Amp
Outer Diameter/Length: 24mm / 36.5mm
Diameter of the Shaft: 2mm/14mm
Poles: 2
Weight: 73g
Application: 1:18,1:16 On/Off-road/ Truck /Monster