CNHL Lightning LiHV 4S 3500mAh 15.2V 120C XT60

Product Specifications

Capacity 3500mAh

Voltage 15.2V / 4S LiHV

Discharge Rate 120C Continuous / 240C Burst

Output Connector XT60 Plug

Dimensions (L×W×H) 104 × 33 × 38 mm

Weight Approx. 290 g

Charge Rate 5C Max

Balance Connector JST-XHP-5P

Wire Gauge 12 AWG

Stock Number HVS3501204XT60

Product Overview

The CNHL Lightning LiHV 3500mAh 15.2V 4S 120C LiPo Battery with XT60 Plug is built for RC pilots who want strong power delivery while keeping overall battery weight in a practical range for balanced flight performance.

Because this is a LiHV battery, it can be charged to a higher voltage than a standard 4S LiPo. In real use, that usually means a stronger initial punch, a more energetic throttle feel, and better early-pack response in aircraft and other 4S platforms.

With a 120C continuous discharge rate, this battery is intended for demanding setups that need stable current delivery, especially where clean takeoff power, sustained pull, and reliable throttle response matter.

Typical Applications

Sport RC airplanes

EDF jet aircraft

RC boats

FPV fixed-wing aircraft

RC vehicles requiring a 4S XT60 battery

Compatible RC Models

This battery can be used in a variety of RC aircraft and vehicles requiring a 4S XT60 power system, including:

E-flite Habu SS

Turbo Timber SWS

Ultra Stick series

For additional compatible aircraft, see the full guide here: LiPo batteries for FMS Cessna 182 1500mm PNP.

Related Options & Use Cases

The 3500mAh capacity is a practical option for pilots who want extended flight sessions and smoother power delivery on the CNHL Havok Racer. Compared with lighter packs, this battery adds a bit more nose weight, which can improve stability during high-speed passes and help maintain momentum in windy conditions.

Explore additional compatible batteries here: Best 4S LiPo Battery for CNHL Havok Racer.

This battery can also be used in the E-flite Beechcraft D18 / RC-45J 1.5m when flying on a 4S setup, where stronger takeoff roll and improved climb margin are desired.

The aircraft typically uses an IC3 / EC3-style connector. Because this battery uses XT60, a short XT60-to-EC3 adapter is required for installation.

See compatible options here: LiPo batteries for E-flite Beechcraft D18 / RC-45J 1.5m.